How to Calculate the Cost of Employee Onboarding

Wikidoc Team
Round wooden table with a stack of books under pendant lamps

Introduction

Every new starter needs to be shown the ropes.

Where things are kept. How the booking system works. What to say when a customer complains. Which jobs come first on a Monday. In most small businesses, that knowledge is passed on the same way it always has been: a new person sits beside someone experienced and watches.

It works. But it’s expensive, and the cost is easy to miss, because it’s paid in the trainer’s time rather than on an invoice. Every hour your best team member spends showing someone how to do something is an hour they aren’t doing their own work.

And it’s paid again with every new starter. The fifth person you train on the same process takes as long as the first, because the knowledge still lives only in the trainer’s head.

This guide shows you how to put a number on onboarding, and how to work out whether writing your processes down would pay for itself. You’ll learn what to count, where to find each figure, how to work it out by hand or with Wikidoc’s free cost of employee onboarding calculator, and how to read the result.

What is employee onboarding?

Employee onboarding is the process of taking a new hire from their first day to doing their job independently. It covers paperwork and setup, but mostly it’s training: learning the business’s processes, systems and standards. The cost of employee onboarding is mainly the time other people spend teaching them.

Onboarding usually runs in phases, from pre-boarding before day one to the first 30, 60 and 90 days. The new-hire onboarding checklist every small business needs sets out what belongs in each phase.

For this calculation, we focus on the part that costs most and is easiest to change: the hours someone else spends training each new starter in person.

Why onboarding costs more than it seems

Onboarding costs more than it seems because the main cost is a colleague’s time, spread over weeks, and recorded nowhere. It’s repeated in full for every new starter, since knowledge that lives in one person’s head has to be passed on again each time. With a few hires a year, those hours add up quickly.

There are two costs in onboarding:

The trainer’s time. Shadowing, one-to-one sessions, and answering questions while the new person finds their feet. This calculator counts it.

The new starter’s slower output. While they learn, they’re paid in full but can only do part of the job. That’s a real cost too, and it’s counted by the cost of employee turnover calculator. See how to calculate the cost of employee turnover.

Keeping the two separate stops you counting the same hours twice.

What the calculator works out

Wikidoc’s cost of employee onboarding calculator works out two things. First, what training new starters costs you a year today. Second, what written procedures could save, less the one-off time it takes to write them, and how many new starters it takes for that writing time to pay back.

It asks for five figures, in two groups.

Group Field What it means
Training today New starters a year Everyone you expect to train over a year
Hours spent training each one in person Shadowing and one-to-one training by someone else
What an hour of the trainer’s time costs Their pay plus on-costs
With written procedures Hours you think they’d save on each new starter Your own estimate of trainer hours saved
Hours to write them, once The time to write the procedures in the first place

It gives back seven results: onboarding cost a year, trainer hours a year, what written procedures would save, that saving as a share of today’s training time, the cost of writing them, the first-year result after writing, and how many new starters it takes to pay back.

The calculator doesn’t assume any saving of its own. The hours saved are your estimate, and you can set them to zero.

The formula

Onboarding cost a year is new starters × training hours per starter × the trainer’s hourly cost. The saving is new starters × hours saved per starter × the same hourly cost. The writing cost is hours to write × the trainer’s hourly cost. The first-year result is the saving minus the writing cost.

In full:

  1. Onboarding a year = new starters × hours training each one × trainer’s hourly cost
  2. Saved a year = new starters × hours saved on each × trainer’s hourly cost
  3. Writing them = hours to write them × trainer’s hourly cost
  4. The first year = saved a year − writing them
  5. Pays back after = hours to write them ÷ hours saved on each new starter, rounded up

Hours saved can’t be more than today’s training hours, so the calculator caps it there. The page prints this formula with your figures in it.

How to calculate the cost, step by step

Step 1: Count your new starters

Enter how many people you expect to train in a year. Include replacements for leavers, new roles, seasonal and casual staff, and anyone moving into a new role internally. If you’re not sure, look at the last twelve months.

The more people you train, the more onboarding costs, and the faster any saving pays back.

Step 2: Estimate hours spent training each one

Count the trainer’s hours, not the new starter’s. Think through a typical new starter’s first weeks:

  • Shadowing. Days spent sitting beside a colleague, watching them work.
  • One-to-one sessions. Time spent walking through systems, procedures and standards.
  • Answering questions. The “how do I…” interruptions that continue for weeks after formal training ends.
  • Checking work. Reviewing what the new starter has done, and correcting it.

A practical way to estimate it: ask the person who trained your last new starter how much of their time it took, week by week, until the new starter could work alone. Add it up.

If several people train each new starter, add their hours together.

Step 3: Work out the trainer’s hourly cost

Trainers are often senior staff, managers or the owner, so their hours cost more than average. Include pay plus on-costs: payroll tax, pension or superannuation, holiday pay and similar. If different people train, use an average.

At this point the calculator shows your yearly onboarding cost. You can stop here if that’s all you want to know.

Step 4: Estimate the hours written procedures would save

This is the most important figure, and only you can set it.

Make a list of everything you explain to every new starter. For each item, ask: could they learn this from a written procedure, a checklist or a short training video, instead of from a person? Some things, like how to process a refund in your system, are perfect for a procedure. Others, like how to handle your most difficult client, will always need a conversation.

Add up the trainer hours spent on the items that could be written down. That’s the most procedures could save. Then be realistic: new starters will still have questions, and someone will still check their work. A cautious figure is a fraction of that total.

If you’re unsure, enter a low number. The calculator will show you how many hours you’d need to save for writing the procedures to pay back.

Step 5: Estimate the hours to write them

Writing procedures takes time, and the calculator counts it. Estimate how long it would take to write down the processes on your list from Step 4.

How long depends on how you do it. Writing from scratch in a word processor is slow. Recording yourself doing the task once and having a tool turn the recording into a draft is much faster. Wikidoc’s free AI SOP generator turns a screen recording or notes into a step-by-step SOP, and the free AI training video generator turns a recording into a narrated training video.

This cost is paid once. After that, every new starter benefits from the same procedures. Keeping them up to date takes some time too, but far less than writing them in the first place.

A worked example

Here’s the calculation with the calculator’s example figures. They aren’t statistics, just numbers to show the method.

A business takes on 6 new starters a year. Someone spends 40 hours training each one, at $40 an hour. The owner estimates written procedures would save 15 of those hours on each new starter, and that writing them would take 30 hours.

Line Working Result
Trainer hours a year 6 starters × 40 hours 240 hours
Onboarding a year 240 hours × $40 $9,600
Written procedures would save 6 starters × 15 hours × $40 $3,600
Of today’s training time 15 ÷ 40 38%
Writing them, once 30 hours × $40 $1,200
The first year, after the writing $3,600 − $1,200 $2,400
Pays back after 30 hours ÷ 15 hours, rounded up 2 new starters

In this example, the writing time pays back after the second new starter. Everything after that is time the trainer gets back, every year, for as long as the procedures stay current.

How to read your result

Your result shows what onboarding costs today, what written procedures could save, and when the time to write them pays back. Look first at the payback line: if the writing time pays back within a year’s new starters, documenting your onboarding is worth doing on time alone, before counting any other benefit.

The yearly cost tells you how much trainer time onboarding takes. Even before thinking about savings, it’s worth knowing.

The saving and its share tell you how much of that time written procedures could hand back, according to your own estimate.

The first-year result can be negative. That doesn’t mean it isn’t worth doing. It means the writing time is paid back in the second year instead of the first. Procedures keep working long after the first year.

The payback line is the simplest test. If it says two new starters and you hire six a year, the decision is easy. If it says twenty and you hire two a year, focus on the few processes that take the most training time.

Try a few estimates. Change the hours saved up and down to see how sensitive the result is. If even a cautious estimate pays back within a year, you can be confident.

The result is an estimate from your own figures, to help you compare options. It isn’t financial advice.

What the calculation leaves out

The calculator counts only the trainer’s time, so the real value of written procedures is likely higher than the result. It leaves out the new starter’s own time, getting them up to speed sooner, fewer mistakes once the steps are written down, and the benefit to existing staff who look things up too.

Getting to full speed sooner. A new starter who can look up how to do something doesn’t have to wait for an answer. Their slower output is part of the cost of employee turnover, and shortening it is often worth more than the trainer hours saved.

Fewer mistakes. Written steps are followed more consistently than remembered ones.

Existing staff. Experienced people forget the steps for tasks they do once a quarter. Procedures help them too. The cost of undocumented process calculator counts that time.

Less dependence on one trainer. If only one person can train new starters, onboarding stops when they’re away. Written procedures spread that load.

Consistency. Every new starter learns the same way, rather than picking up whichever trainer’s habits they happened to sit beside.

Treat the saving as a cautious figure.

Common mistakes when calculating onboarding cost

The most common mistakes are counting the new starter’s hours instead of the trainer’s, forgetting the questions that continue after formal training, and overestimating what procedures would save. Each one makes the result less reliable. A cautious estimate, honestly made, is the most persuasive.

  1. Counting the new starter’s time. The calculator asks for the trainer’s hours. The new starter’s slower output belongs in the turnover calculation.
  2. Counting only formal training. The interruptions in weeks two to eight often add up to more than the first-day induction.
  3. Assuming procedures replace all training. Some things need a person. Only count what could genuinely be learned from a procedure.
  4. Forgetting the writing time. It’s real, and leaving it out makes the saving look too good.
  5. Ignoring upkeep. Procedures that are never updated stop being trusted. Plan a little time to keep them current.
  6. Using last year’s hiring as a forecast without thinking. If you plan to grow, enter the new starters you expect.

How to reduce the cost of employee onboarding

You reduce the cost of employee onboarding by moving what can be learned alone out of one-to-one training and into written procedures, checklists and short videos. The trainer then spends their time on what genuinely needs a person: judgement, questions and checking work. The steps below get you there.

1. List what you teach every new starter

Write down every task and topic covered in a new starter’s first month. This list is the backbone of both your procedures and your onboarding plan.

2. Start with what’s taught most often

The processes every new starter learns, in every role, give the biggest saving per hour of writing.

3. Record it once, turn it into a procedure

Have the person who knows the task best record themselves doing it once. Wikidoc’s free AI SOP generator turns the recording into a step-by-step SOP, and the AI training video generator turns it into a narrated video. For a full walkthrough, see how to create corporate training videos instantly using AI and how to create effective training manuals.

4. Put it into an onboarding plan

Order the procedures into a plan by day and week, with a named owner for each step. A new-hire onboarding checklist and a 30-60-90 day plan give you a structure to start from.

5. Turn procedures into training the new starter can work through

A procedure the new starter is told to read is easy to skip. A training module with the procedure, a short video and a quick check of understanding is harder to skip, and shows you who has finished. Wikidoc, an operations platform for small businesses, turns SOPs into training modules you can assign to each new starter and track.

6. Keep the trainer for what needs a person

With the basics written down, the trainer’s time goes on answering real questions, explaining judgement calls and checking work. That’s a better use of an experienced person, and a better experience for the new starter.

7. Run the calculator again

After your next few hires, compare the actual training hours with your estimate. Update the calculator with real figures and see whether the saving matched.

Frequently asked questions

How is the cost of employee onboarding worked out?

It multiplies your new starters by the hours spent training each one and the trainer’s hourly cost. Then it works out the share written procedures could save, less the time to write them, and how many new starters it takes for that writing time to pay back.

What does slow onboarding cost?

Two things. The trainer’s time, which this calculator counts, grows with every week a new starter needs someone beside them. And a new starter works below full speed until they’re up to speed: the cost of employee turnover calculator counts that part.

How many hours would written procedures save?

Only you can say. List what you explain to every new starter, and estimate how much of it they could learn from a written procedure or a training video instead. The calculator uses your estimate and assumes no saving of its own.

Why does the calculator ask how long writing takes?

Because writing procedures takes time too. The first-year figure takes it off, and the payback line shows how many new starters it takes for the saving to cover it.

What if the first-year result is negative?

It means the writing time pays back after the first year rather than within it. Look at the payback line: if your hiring over the next year or two passes that number, the procedures still pay for themselves.

Is my data private?

Yes. The calculator runs in your browser. The figures you type aren’t sent to Wikidoc or saved anywhere, and they’re gone when you leave the page.

Where do the example figures come from?

They’re there to show how the calculator works. They aren’t averages or research, so replace each one with your own.

Work out your own figure

Onboarding will always take some of someone’s time. The question is how much of it is spent teaching things that could be written down once and learned many times.

Open the free cost of employee onboarding calculator, enter your own figures, and see what onboarding costs you a year and when written procedures would pay back. Then pick the one process every new starter learns first, and write it down.